www.Mold-Tech.com

Architexture.co



 

 



Click Here to Download Adobe Reader


Electroless Nickel Teflon Mold Coatings Designed to Maximize your Mold's Performance.

If you are looking for better performance from your molds, call us today and find out how Mold-Tech can shift your mold into high gear!

Tribocoat® is a proven line of composite Electroless coatings that have the best combination of corrosion resistance, wear resistance, dry lubrication and adhesion properties... better than any competitive coating on the market today.

Electroless nickel plating coatings using Tribocoat®, Mold-Tech’s proprietary EN product, provides reliable and effortless mold release characteristics for plastics molds. This autocatalytical nickel plating process, incorporating evenly distributed Teflon® particles, provides a highly uniform nickel phosphorus alloy coating exhibiting good resistance to wear and excellent corrosion resistance. Consistent deposit thicknesses across all surfaces of between 0.0002 and 0.0020 (+/- 0.0001) provide highly reliable uniformity.

The combination of nickel and Teflon® polymers provides an extremely low coefficient of friction with an effortless release from molds during molding operations. These nickel phosphorus alloy and Teflon® combinations are perfectly suited for use in molding applications using plastics, epoxies and silicones, and because of its superb release characteristics, it eliminates the need for release sprays.


Tribocoat® benefits include:

  • Reduced Cycle Time
  • Quick, Effortless Release
  • Corrosion Resistance
  • Extended Mold Life
  • Improved Productivity

The Tribocoat® process can be used with any tool steels, BeCu, forged aluminum, cast iron and stainless steel. It can be welded and benched without any associated negative effect to the remaining mold. Tribocoat® works excellently with all molding materials with the exception of pure rubber, and it works well with Silicone rubber, TPO, PVC and Sanoprene.

Mold-Tech prides itself on its exceptional customer service. We want you to come back and to ensure you will, we will do everything possible to provide you with “over-the-top” quality and service. Tribocoat® is competitively priced and comes with the added benefit of yielding superior advantages when compared with any mold coating on the market today. Our normal turnaround time is 2-3 days.

Mold-Tech Tribocoat® HT (High Teflon) Specifications

Type of Coating:

Electroless Nickel with 20% PTFE (Teflon) Composite Coating

Thickness Range:

0.0002 to 0.0020 inches +/- 0.0001 uniform across all coated surfaces

Lubricity:

Coefficient of friction 0.04

Corrosion Resistance:

Over 300 hours salt spray @ 0.001 thick build

Hardness:

40 Rc - 50 Rc after 500°F for 2 Hours

Wear Resistance

14MG. Tabor CS-10 wheel w/ 1 kg load

Operation Range:

-50°F to +750°F

Max Size - Steel:
Max Size - Alumnium:

64” long x 32” wide x 43” deep
72” long x 36” wide x 43” deep

Lifting Capacity:

20 tons

Mold-Tech Tribocoat® LT (Low Teflon) Specifications

Type of Coating:

Electroless Nickel with 7% PTFE (Teflon) Composite Coating

Thickness Range:

0.0002 to 0.0020 inches +/- 0.0001 uniform across all coated surfaces

Lubricity:

Coefficient of friction 0.06

Corrosion Resistance:

Over 300 hours salt spray @ 0.001 thick build

Hardness:

52 Rc - 55 Rc after 500°F for 2 Hours

Wear Resistance

14MG. Tabor CS-10 wheel w/ 1 kg load

Operation Range:

-50°F to +750°F

Max Size - Steel:
Max Size - Alumnium:

64” long x 32” wide x 43” deep
72” long x 36” wide x 43” deep

Lifting Capacity:

20 tons

Mold-Tech Tribocoat® EN (Electroless Nickel) Specifications

Type of Coating:

Electroless Nickel

Thickness Range:

0.0002 to 0.0020 inches +/- 0.0001 uniform across all coated surfaces

Lubricity:

Coefficient of friction 0.10

Corrosion Resistance:

Over 300 hours salt spray @ 0.001 thick build

Hardness:

62 Rc -65 Rc after 500°F for 2 Hours

Wear Resistance

14MG. Tabor CS-10 wheel w/ 1 kg load

Operation Range:

-50°F to +750°F

Max Size - Steel:
Max Size - Alumnium:

64” long x 32” wide x 43” deep
72 long x 36 wide x 43 deep

Lifting Capacity:

20 tons


Tribocoat® performance engineered Electroless Coatings deliver better mold performance than any competitive product on the market. Its reliable delivery of reduced cycle time, effortless mold release, excellent wear resistance, corrosion resistance and competitive pricing all contribute to the perfect solution for every electroless nickel Teflon® enriched plating process requirement.




"Your access and use of this site constitutes unconditional acceptance of the terms of our Web Site Use Agreement. Please read the Web Site Use Agreement."